COMMERCIAL AND INDUSTRIAL INFRASTRUCTURE

• Office buildings
• Shopping centers
• Warehouses
• Logistic centers
• Industrial parks
• Factories
• Machine foundations
• Parking lots

In the European Union and in the United States of America the URETEK technologies are often used for commercial and industrial infrastructure repair. The technology has excellent references, like Metro stores, Mercedes-Benz, shopping centers, gas stations. With URETEK you have found a reliable partner for your projects. Turn to us with confidence!

It is a common problem with commercial and industrial buildings that the concrete slabs are sinking or starting to rock. With the modern URETEK technology it is possible to quickly and economically fix the floors in warehouses, factories or commercial premises, in such a way that the production or the customer traffic is only minimally effected. In commercial buildings our work can be organized so that it is performed from evening till morning, thereby the traffic is effected only a little or not at all.

Typical URETEK solutions

Rocking or cracked concrete slabs

URETEK has a tradition going back 30 years of stabilizing and re-leveling cracked and rocking slabs. URETEK developed the SLAB LIFTING technology especially for these kinds of problems. We can say with assurance that there is no concrete slab problem we haven’t encountered. Several million square meters of slabs have been re-leveled or stabilized worldwide with the URETEK method.

A typical problem is that the slabs move independently at the dilation areas. For example when a vehicle or forklift rolls from one slab to the other. For this, injections performed along the dilation line near the surface (possibly with DEEP INJECTIONS also), can be a reliable solution. These type of jobs can be performed in a few hours per slab. The traffic displacement at commercial and industrial sites is minimal.

When voids under the slabs are the problem, URETEK represents an excellent solution. The slabs have to be drilled and injected only at few points per slab. We guarantee that the slabs will become stabile. URETEK has proved itself on public roads as well. The structure of a concrete or asphalt road is different than an indoor concrete slab, yet when subsidence or cracks appear, it can be traced to the same causes. In both cases URETEK is capable of eliminating the causes of the problem.

Stabilizing slab subsoils

If the cause subsidence or cracks is caused by weak subsoils, it can be solved with URETEK DEEP INJECTIONS or URETEK POWER PILE methods. The method calls for handling the soil in a raster manner causing the soil to gain a sufficient load bearing capacity. The injections do not endanger the floor structure, but guarantees that the subsoil will have the proper density. This method will stabilize a floor even if the subsoil is weak to great depth. The method can be used up to 7 meters of depth. For special project even deeper soil layers can be stabile.

Stabilization of building and machine foundations

URETEK has been successfully applied to uniquely built, deep building foundations, machine foundations and pits. The unmatched URETEK resin is capable of stabilizing the greatest machine foundations. The operation of the plant is minimally or not at all disturbed by the injections. Therefore a number of auxiliary costs can be saved, which positively effects the bottom line of the company. Our firm is ready to hold a presentation for your company, where we will present a solution to your problem.

Other solutions

Often times utility pipes, tanks, pits or voids of unknown origin need to be filled at factories, gas stations and other installations - as a preventive measure. The URETEK BENEFIL material was especially developed to handle these problems. The material is lightweight, therefore it does not overburden the subsoil, at the same time the load bearing capacity is comparable to an average soil. The void filled with this material will not experience a cave in at a later time. URETEK BENEFIL can be injected or poured into any shape void. The material flows easily until it cures, therefore points far away can be filled also. The material is removable if the tank or void needs to be used at a later date. This cannot be said of other filling materials.

Advantages of the URETEK technology:

• The URETEK technology can be applied in any season - even in -20 °C winter
• The work is clean
• No debris is created, therefore disposal is not a problem
• Economical method with less auxiliary expenses
• The injection equipment can be 100 m from injection point
• Many cm of lifting is possible for floors and dividing walls
• The work does not affect the activities in the commercial and production facilities
• The work can be performed at night or on weekends to avoid reduction in traffic
• The furnishings, equipments and machinary does not need to be removed.
• The technologies can be used when there is floor heating
• There is minimal dust and noise
• We create complete documentations
• We always stay within the deadlines
• Does not require a large establishment area
• We only occupy the premises when the URETEK work is happening
• Fast execution, if needed we can work 24 hours a day (3 shifts).
• We are happy to hold presentations to your company or engineering group about the URETEK technologies

With the URETEK company you have found a reliable partner for your projects. Turn to us with confidence!

On these pages we have introduced the technologies. If you would like know more about the methods, or would like a quotation, please choose from the following possibilities.

If you would like more information about the technology of URETEK please click here.

Back to top of page